I used to have a lot of success in Townsville on the Spaniards using split tail mullet. I don't have a video but I can try and describe it.
1. Fillet a suitable sized mullet leaving the fillets attached at the shoulders/gills. If you can run the knife though the tail fin even better,
2. Break out the frame and discard.
3 Push the eye of a 7/0 to 9/0 limmerick hook (single or ganged) through from the gut cavity into the mouth. So the point is down,
4 Push piano wire down through the top of the mullet head (there is a soft spot) through the eye of the hook and out the bottom jaw.
5 Thread a ball sinker and rest against the chin of the Mullet while you take the tag end of the wire and twist to the main part creating a tight loop which holds the sinker and Mullet fairly firmly together.
6 Cut the piano wire to a suitable trace length attach a swivel with another loop at the end.
I would make 6 or 8 baits the night before and of course take the makings to knock them up if needed during the day.
Hope this makes sense for you.