6X4 TRAILER CONVERSION TO SUIT PA (finished pics )

User avatar
cheaterparts
Needs a life (forum tragic)
Posts: 5758
Joined: 29 Mar 2010, 07:04
kayak: Stealth Profisha 525 ---
Real Name: Stephen-The Mud King
Location: Cranbourne

Re: 6X4 TRAILER CONVERSION TO SUIT PA

Post by cheaterparts »

yakatak wrote:Hi
I am looking at doing the same thing now I have 2 Yaks.
I had a look at the Vicroads site and saw that they dont allow any overhang passed the trailer tray, front or back I hope Im wrong.
Here is the link, check it out.http://www.vicroads.vic.gov.au/NR/rdonl ... n01833.pdf
Cheers Al
then about every boat trailer would be in the poo - I haven't seen to many boats with the outbourd hanging a long way past the end of the trailer
it maybe boat trailers that get around this

cheater
My kayak PBs
Gummy shark 128 Cm -- Elephant fish 85 Cm -- Snapper 91 Cm -- KG Whiting 49 Cm -- Flathead 55 Cm -- Garfish 47 Cm --Long tail Tuna 86 cm -- Silver Trevally 40 Cm -- Cobia 117 Cm -- snook 53 Cm -- Couta 71 Cm -- Squid 44 hood length


cheater
0402 208 657
User avatar
bilby
PHD in Yakology.
Posts: 2841
Joined: 24 Jan 2010, 20:13
kayak: Fender Stratocaster + Marshall stack
Real Name: Fozzy bear
Location: Mount Martha

Re: 6X4 TRAILER CONVERSION TO SUIT PA

Post by bilby »

Hi,
I've always believed the law was that there was no more than 1mt overhang from the rear of the trailer, Over the draw bar is no problem. Its the same as a car with roofracks, thats why a lot of tradies put a unloaded trailer on the back of there ute, so they can carry 6mt long timbers and its hanging over the trailer.
I wouldn't worry but i'm going to get it registered, if you look to be doing the right thing with over hang or even a rag off the back of the yak, most cops will turn a blind eye. As cheater says, every boat trailer in Australia would be deemed unroadworthy if thats the case.
This is also another reason why i made my trailer with a retractable drawbar, i can unload the yak and retract the draw bar, so its not sitting in the carpark with a "LOOK AT ME I'M OVERSIZE" on its forehead, that way no one is none the wiser, with the yak on its hardly noticeable.
Cheers Bilby.
Bill 0409139460
User avatar
Jenko
PHD in Yakology.
Posts: 2426
Joined: 07 Mar 2010, 21:21
kayak: Big Aluminium One
Real Name: Gary
Location: Camperdown

Re: 6X4 TRAILER CONVERSION TO SUIT PA

Post by Jenko »

I think the retractable draw bar is a brilliant idea, bit cheesed off now that I didn't see your trailer before I built mine. I want to be able to carry other stuff (Signs...I'm a signwriter) that doesn't need the trailer to be the full length all the time.
Great idea.
Cheers Gary
Cheers Gary...
WestVic Signs 0429 184 940
I got a sweater for Xmas, really wanted a moaner or screamer.

Flathead PB 83cm Bream PB 43cm Luderick 38cm
User avatar
Babylon
Needs a life (forum tragic)
Posts: 4893
Joined: 02 Feb 2010, 21:43
kayak: 2017 Hobie Revo 13, Hobie Compass Duo
Real Name: Jim
Location: Corinella Victoria

Re: 6X4 TRAILER CONVERSION TO SUIT PA

Post by Babylon »

Its 1.2 meter overhang on the back then you have to have some sort of flag and lights on it
my yaks are 500mm over back 1 meter over front had no probs registering it .Cheers Jim :)
User avatar
cheaterparts
Needs a life (forum tragic)
Posts: 5758
Joined: 29 Mar 2010, 07:04
kayak: Stealth Profisha 525 ---
Real Name: Stephen-The Mud King
Location: Cranbourne

Re: 6X4 TRAILER CONVERSION TO SUIT PA

Post by cheaterparts »

this ia bit off topic but my job for the next couple of weeks is taking 400 mm ( 16 " ) out of the width of a low loader trailer
so it can be regoed
the old tank carrier is a bit wide for our roads - I have a big oxy so I'll keep warm today

cheater
My kayak PBs
Gummy shark 128 Cm -- Elephant fish 85 Cm -- Snapper 91 Cm -- KG Whiting 49 Cm -- Flathead 55 Cm -- Garfish 47 Cm --Long tail Tuna 86 cm -- Silver Trevally 40 Cm -- Cobia 117 Cm -- snook 53 Cm -- Couta 71 Cm -- Squid 44 hood length


cheater
0402 208 657
User avatar
yakatak
The force is strong in this one
Posts: 104
Joined: 06 Feb 2010, 17:19
kayak: Hobie Mirage 09 Dune Pro Angler & 08 Red Oasis
Real Name: Alan
Location: Werribee

Re: 6X4 TRAILER CONVERSION TO SUIT PA (finished pics )

Post by yakatak »

Hi
Thats great, almost exactly what i need to do to my 6X4.
Can you tell me are they 2 rubber rollers welded into a V ? and the block at the front is that something you bought or handmade?
How did you end up securing the pull out bar, a pin/s or bolted it?
Cheers Al
Hobie Pro Angler, The Only KaYak Visable From Space.
My Best Catch So Far - My Wife - 46cm Flathead - 37cm Pinky - 32cm Whiting
Alan 0413 309764
User avatar
Babylon
Needs a life (forum tragic)
Posts: 4893
Joined: 02 Feb 2010, 21:43
kayak: 2017 Hobie Revo 13, Hobie Compass Duo
Real Name: Jim
Location: Corinella Victoria

Re: 6X4 TRAILER CONVERSION TO SUIT PA (finished pics )

Post by Babylon »

Hey Bill that looks great mate you have done a great job on it :)
just a note on over hang David from rod bendings in inverloch hobie dealer
was packing up his trailer after doing demos he had an AI down the center of
of his trailer with a small overhang out the back police pulled up behind him
before he took of and told him that overhang was illegal dave said since when
and the copper told him its a new law no overhang at all on trailers..go figure.Cheers Jim :)
User avatar
yakatak
The force is strong in this one
Posts: 104
Joined: 06 Feb 2010, 17:19
kayak: Hobie Mirage 09 Dune Pro Angler & 08 Red Oasis
Real Name: Alan
Location: Werribee

Re: 6X4 TRAILER CONVERSION TO SUIT PA (finished pics )

Post by yakatak »

Hi
So it looks like that link i pasted from Vicroads is right , no overhang at all front or back. :shock:
So they make up this new law on the quiet so they can catch alot of people and make even more money from fines. :x
This rule seems to effect normal trailers but not boat trailers which have to have overhang because of the outboard motor.
I think the only way for us to get around this would be to register our trailers as Boat Trailers, What do you think? ;)
Cheers Al
Hobie Pro Angler, The Only KaYak Visable From Space.
My Best Catch So Far - My Wife - 46cm Flathead - 37cm Pinky - 32cm Whiting
Alan 0413 309764
User avatar
Babylon
Needs a life (forum tragic)
Posts: 4893
Joined: 02 Feb 2010, 21:43
kayak: 2017 Hobie Revo 13, Hobie Compass Duo
Real Name: Jim
Location: Corinella Victoria

Re: 6X4 TRAILER CONVERSION TO SUIT PA (finished pics )

Post by Babylon »

My trailer is registered as a boat trailer :D Cheers Jim :)
User avatar
cheaterparts
Needs a life (forum tragic)
Posts: 5758
Joined: 29 Mar 2010, 07:04
kayak: Stealth Profisha 525 ---
Real Name: Stephen-The Mud King
Location: Cranbourne

Re: 6X4 TRAILER CONVERSION TO SUIT PA (finished pics )

Post by cheaterparts »

yakatak wrote: I think the only way for us to get around this would be to register our trailers as Boat Trailers, What do you think? ;)
Cheers Al
as an ex trailer manufacturer I would have thought so . Kayaks/canoes/sailing craft and stink boats are all boats

cheater
My kayak PBs
Gummy shark 128 Cm -- Elephant fish 85 Cm -- Snapper 91 Cm -- KG Whiting 49 Cm -- Flathead 55 Cm -- Garfish 47 Cm --Long tail Tuna 86 cm -- Silver Trevally 40 Cm -- Cobia 117 Cm -- snook 53 Cm -- Couta 71 Cm -- Squid 44 hood length


cheater
0402 208 657
Post Reply