I've got some galv pipe left over from an old trampoline frame (love old trampolines!)
Thinking I might give it a go with this as although not as light as aluminium, it should have the same results. Then maybe cover this with marine carpet or rubber if it works out well.
Pvc bunk for transporting ai upright?
- Wind Waker
- Lord of the fish
- Posts: 1391
- Joined: 04 Apr 2015, 23:09
- kayak: Hobie Outback, Hobie PA14 MD180,
- Real Name: Brett
- Location: South East Suburbs
- Contact:
Re: Pvc bunk for transporting ai upright?
Alloy pipe should cost you about $50 if you buy from ullrich or similiar. I use it at work and honestly its cheaper then people first think
Live long, fish hard and hopefully catch something.
- Nello
- Qualified Fish Monger
- Posts: 420
- Joined: 16 Apr 2015, 09:36
- kayak: Red Ai and a tinny.
- Real Name: Nelson
- Location: whittlesea
Re: Pvc bunk for transporting ai upright?
that's a lot better than what i thought, thanks.Wind Waker wrote:Alloy pipe should cost you about $50 if you buy from ullrich or similiar. I use it at work and honestly its cheaper then people first think
I'm thinking if i have enough of the galv pipe ill give it a go with that, like a trial, and if it works well then ill go up to alloy for something more permanent and durable
-
- Qualified Fish Monger
- Posts: 222
- Joined: 15 Mar 2012, 21:14
- kayak: Hobie Revo
- Real Name: Lindsay
- Location: Seaford
Re: Pvc bunk for transporting ai upright?
Here are some pics of the set up I find best for carrying a revo13 upright. Is just some pipe with tabs welded to secure to crossbars. Covered in pool noodle with a boat roller at the rear. Is heaps quicker to load and unload than any other method I have used. Steel cost about $40 by memory and $20ish for the roller.
- Nello
- Qualified Fish Monger
- Posts: 420
- Joined: 16 Apr 2015, 09:36
- kayak: Red Ai and a tinny.
- Real Name: Nelson
- Location: whittlesea
Re: Pvc bunk for transporting ai upright?
Nice looking setup, that's sorta what I'm hoping to achieve for mine.isportfish wrote:Here are some pics of the set up I find best for carrying a revo13 upright. Is just some pipe with tabs welded to secure to crossbars. Covered in pool noodle with a boat roller at the rear. Is heaps quicker to load and unload than any other method I have used. Steel cost about $40 by memory and $20ish for the roller.
Have you have any issues with the setup at all?
-
- Qualified Fish Monger
- Posts: 222
- Joined: 15 Mar 2012, 21:14
- kayak: Hobie Revo
- Real Name: Lindsay
- Location: Seaford
Re: Pvc bunk for transporting ai upright?
No issues with it. I have the same cross bars on my 4wd so move it between the cars as required. The pool noodle will degrade eventually so replaced earlier this year. Have been transporting like this for over 2 years. When on holidays with the family we place a kids kayak straight on top of the revo and then an adults bike attached to the cross bars, PVC tube for fishing rods, shovel etc.Nello wrote: Nice looking setup, that's sorta what I'm hoping to achieve for mine.
Have you have any issues with the setup at all?
- Nello
- Qualified Fish Monger
- Posts: 420
- Joined: 16 Apr 2015, 09:36
- kayak: Red Ai and a tinny.
- Real Name: Nelson
- Location: whittlesea
Re: Pvc bunk for transporting ai upright?
That's good to hear, nice work
- laneends
- Vyak Addict
- Posts: 6641
- Joined: 25 Jan 2013, 15:59
- kayak: Quests 11 13 Adventure 16 Revo 16 ORSki epic k1
- Real Name: Keith
- Location: Melbourne, Bundoora
Re: Pvc bunk for transporting ai upright?
If you are only using two roof bars, how is the weight distribution going to spread out? Remember it is a 16 foot yak. my problem was the mid point was on front bar, so that took all the weight. Being rail mounts rather than gutter mounts it caused roof panel to flex and pop.
A 16 foot yak is a lot harder to balance evenly on the roof than a 13 foot yak, without sticking way out the back. Cant remember the car you have.
A 16 foot yak is a lot harder to balance evenly on the roof than a 13 foot yak, without sticking way out the back. Cant remember the car you have.