I built a cheap bevel tool today to bevel the strips on my strip build a fairly simple process
I grabbed a bit of scarp 40 x 12 aluminium ( some old gunnel rail for a trailer sailor ) a cut section was put on the mill and a 6 mm grove at a 12 deg angle to except the blade ( a cheap 6 mm chisel blade )
the bevel tool had holes drilled and tapped for 2 blade lock screws and another screw to move the blade forward
and a couple of knobs fitted
there still needs a little tweeking with the bottom edge it needs a bit more curve as the blade can be lifted of depending on the curve in the stip that is being worked on
but on the whole it works a treat - the strip gaps are easy closed up with this tool by just running along the last fitted strip and keeping the angle of the bevel plan along the form on the strong back
cost break down about $ 12 for a cheap chisel ( which had the blade cut to length ) so scrap aluminium beside the shed and an hour or so mucking around
cheater mk 2.4 strip build
- cheaterparts
- Needs a life (forum tragic)
- Posts: 5758
- Joined: 29 Mar 2010, 07:04
- kayak: Stealth Profisha 525 ---
- Real Name: Stephen-The Mud King
- Location: Cranbourne
Re: cheater mk 2.4 strip build
My kayak PBs
Gummy shark 128 Cm -- Elephant fish 85 Cm -- Snapper 91 Cm -- KG Whiting 49 Cm -- Flathead 55 Cm -- Garfish 47 Cm --Long tail Tuna 86 cm -- Silver Trevally 40 Cm -- Cobia 117 Cm -- snook 53 Cm -- Couta 71 Cm -- Squid 44 hood length
cheater
0402 208 657
Gummy shark 128 Cm -- Elephant fish 85 Cm -- Snapper 91 Cm -- KG Whiting 49 Cm -- Flathead 55 Cm -- Garfish 47 Cm --Long tail Tuna 86 cm -- Silver Trevally 40 Cm -- Cobia 117 Cm -- snook 53 Cm -- Couta 71 Cm -- Squid 44 hood length
cheater
0402 208 657
- cheaterparts
- Needs a life (forum tragic)
- Posts: 5758
- Joined: 29 Mar 2010, 07:04
- kayak: Stealth Profisha 525 ---
- Real Name: Stephen-The Mud King
- Location: Cranbourne
Re: cheater mk 2.4 strip build
A bit of an update the hull is coming along quite well and with a bit of luck the Hull should be finished stripping by the end of this W/E
I must say getting a bit better with this wood lack and have only taken one small piece off a finger with the plane
I must say getting a bit better with this wood lack and have only taken one small piece off a finger with the plane
My kayak PBs
Gummy shark 128 Cm -- Elephant fish 85 Cm -- Snapper 91 Cm -- KG Whiting 49 Cm -- Flathead 55 Cm -- Garfish 47 Cm --Long tail Tuna 86 cm -- Silver Trevally 40 Cm -- Cobia 117 Cm -- snook 53 Cm -- Couta 71 Cm -- Squid 44 hood length
cheater
0402 208 657
Gummy shark 128 Cm -- Elephant fish 85 Cm -- Snapper 91 Cm -- KG Whiting 49 Cm -- Flathead 55 Cm -- Garfish 47 Cm --Long tail Tuna 86 cm -- Silver Trevally 40 Cm -- Cobia 117 Cm -- snook 53 Cm -- Couta 71 Cm -- Squid 44 hood length
cheater
0402 208 657
- maverick
- Hardcore Vyaker
- Posts: 10913
- Joined: 25 Jan 2010, 21:49
- kayak: Hobie Direction & Hobie Road Sign
- Real Name: TopGunPete
- Location: Mornington
Re: cheater mk 2.4 strip build
Really starting to look good.
Well past the edge, almost at the point of no return.
- Galey
- Lord of the fish
- Posts: 1689
- Joined: 20 Jan 2012, 12:19
- kayak: Ok Frenzy
- Real Name: Linton
- Location: Kialla West.
Re: cheater mk 2.4 strip build
Bloody hell that looks impressive. I do work at a lot of houses and it's amazing at some of the stuff you get to see in peoples sheds and this is no exception.
- cheaterparts
- Needs a life (forum tragic)
- Posts: 5758
- Joined: 29 Mar 2010, 07:04
- kayak: Stealth Profisha 525 ---
- Real Name: Stephen-The Mud King
- Location: Cranbourne
Re: cheater mk 2.4 strip build
What more impressive is that it is in wood - damm stuff is hard to weld ! before this I really only chopped wood for the fireGaley wrote:Bloody hell that looks impressive. I do work at a lot of houses and it's amazing at some of the stuff you get to see in peoples sheds and this is no exception.
My kayak PBs
Gummy shark 128 Cm -- Elephant fish 85 Cm -- Snapper 91 Cm -- KG Whiting 49 Cm -- Flathead 55 Cm -- Garfish 47 Cm --Long tail Tuna 86 cm -- Silver Trevally 40 Cm -- Cobia 117 Cm -- snook 53 Cm -- Couta 71 Cm -- Squid 44 hood length
cheater
0402 208 657
Gummy shark 128 Cm -- Elephant fish 85 Cm -- Snapper 91 Cm -- KG Whiting 49 Cm -- Flathead 55 Cm -- Garfish 47 Cm --Long tail Tuna 86 cm -- Silver Trevally 40 Cm -- Cobia 117 Cm -- snook 53 Cm -- Couta 71 Cm -- Squid 44 hood length
cheater
0402 208 657
- Reeling
- Lord of the fish
- Posts: 1117
- Joined: 22 Nov 2016, 20:20
- kayak: Stealth PF 525
- Real Name: Nath
- Location: Altona
Re: cheater mk 2.4 strip build
There's still timecheaterparts wrote:before this I really only chopped wood for the fire
Looks great mate. Let the bad weather continue
Tuna 20.5kg ---KingFish 90cm --- Snapper 84cm --- Gummy 83cm (55cm legal) ---- Whiting 40cm --- Silver Trevelly 41cm --- Flathead 52cm --- Aussie Salmon 38cm --- Squid 34cm hood
Facebook Page Reeling Fish
Instagram Page Reeling Fish
Facebook Page Reeling Fish
Instagram Page Reeling Fish
-
- PHD in Yakology.
- Posts: 2846
- Joined: 17 Sep 2017, 18:34
- kayak: dune PA14
- Real Name: Peter
- Location: Clifton springs
Re: cheater mk 2.4 strip build
I often weld on wood, does that count?cheaterparts wrote:What more impressive is that it is in wood - damm stuff is hard to weld ! before this I really only chopped wood for the fireGaley wrote:Bloody hell that looks impressive. I do work at a lot of houses and it's amazing at some of the stuff you get to see in peoples sheds and this is no exception.
Mob no: 0401580668
Yak PBs kingfish (about this big <>>><), squid 39 cm, king george 42 cm, snapper 72 cm, gummy 122 cm, 71cm flatty (estimated ) Cobia 133cm
Yak PBs kingfish (about this big <>>><), squid 39 cm, king george 42 cm, snapper 72 cm, gummy 122 cm, 71cm flatty (estimated ) Cobia 133cm
- cheaterparts
- Needs a life (forum tragic)
- Posts: 5758
- Joined: 29 Mar 2010, 07:04
- kayak: Stealth Profisha 525 ---
- Real Name: Stephen-The Mud King
- Location: Cranbourne
Re: cheater mk 2.4 strip build
With the weather being what it was this W/E gave me plenty of shed time and the hull is all but stripped up .There's just a small section to do and will be done easy through the week
next chore then will be to make cradles to hold the hull up the right way so the deck can be striped
next chore then will be to make cradles to hold the hull up the right way so the deck can be striped
My kayak PBs
Gummy shark 128 Cm -- Elephant fish 85 Cm -- Snapper 91 Cm -- KG Whiting 49 Cm -- Flathead 55 Cm -- Garfish 47 Cm --Long tail Tuna 86 cm -- Silver Trevally 40 Cm -- Cobia 117 Cm -- snook 53 Cm -- Couta 71 Cm -- Squid 44 hood length
cheater
0402 208 657
Gummy shark 128 Cm -- Elephant fish 85 Cm -- Snapper 91 Cm -- KG Whiting 49 Cm -- Flathead 55 Cm -- Garfish 47 Cm --Long tail Tuna 86 cm -- Silver Trevally 40 Cm -- Cobia 117 Cm -- snook 53 Cm -- Couta 71 Cm -- Squid 44 hood length
cheater
0402 208 657
-
- PHD in Yakology.
- Posts: 2846
- Joined: 17 Sep 2017, 18:34
- kayak: dune PA14
- Real Name: Peter
- Location: Clifton springs
Re: cheater mk 2.4 strip build
Im not sure your preferred method of sticking it together will hold for very long
But looking good all the same Mob no: 0401580668
Yak PBs kingfish (about this big <>>><), squid 39 cm, king george 42 cm, snapper 72 cm, gummy 122 cm, 71cm flatty (estimated ) Cobia 133cm
Yak PBs kingfish (about this big <>>><), squid 39 cm, king george 42 cm, snapper 72 cm, gummy 122 cm, 71cm flatty (estimated ) Cobia 133cm
-
- Qualified Fish Monger
- Posts: 314
- Joined: 21 Jan 2015, 09:23
- kayak: Pro Fisha 525
- Real Name: Trent
Re: cheater mk 2.4 strip build
Looking good Cheater