For that distance with a heavy kayak four wheels is going to be hard to beat
1) Commercial product:
https://www.c-tug.com/products/double-up-bar/
2) Two sets of strap on wheels:
3) Make your own (you'd probably have to leave it behind so theft could be an issue)
Alternatively, move to the light side
4) A lightweight kayak with one set of strap-on wheels.
I opted for solution 4.
Wheels any ideas
- Steve_R
- Square eyes
- Posts: 961
- Joined: 28 Jul 2014, 11:24
- kayak: Hurricane Skimmer
- Real Name: Stephen
- Location: Berowra Heights (sigh!)
Re: Wheels any ideas
Do not argue with an idiot. He will drag you down to his level and beat you with experience - Greg King
It is impossible for a man to learn what he thinks he already knows ― Epictetus
BOT? https://checkip.kaspersky.com/
- laneends
- Vyak Addict
- Posts: 6641
- Joined: 25 Jan 2013, 15:59
- kayak: Quests 11 13 Adventure 16 Revo 16 ORSki epic k1
- Real Name: Keith
- Location: Melbourne, Bundoora
Re: Wheels any ideas
The double up strap on looks the best. Strap ons can be moved closer to the centre to balance the weight. two axles will reduce tipping and scraping the keel keeping it level. Being strap on its not going to cause any twisting strain on scuppers. Wheels close together should make it easier manoeuvre. Fully demountable so best chance of stowage.
-
- Square eyes
- Posts: 545
- Joined: 18 Jul 2015, 20:43
- kayak: 2015 Outback
- Real Name: Erik
Re: Wheels any ideas
[quote="Steve_R"]For that distance with a heavy kayak four wheels is going to be hard to beat
1) Commercial product:
https://www.c-tug.com/products/double-up-bar/
Well, well. That's exactly what I was talking about.
I haven't seen that before, makes the GT a cinch now.
I was thinking along the lines of the original Hobie cart up rear (or centre for a PA) and the C-Tug type up front.
I think you would have to make sure the strap and buckle are up really tight to try their shenanigns though!
Good stuff there Steve. I also like the holding frame on the second one, although the rods are much too high up for my liking.
Ah, PVC pipe again.........................
1) Commercial product:
https://www.c-tug.com/products/double-up-bar/
Well, well. That's exactly what I was talking about.
I haven't seen that before, makes the GT a cinch now.
I was thinking along the lines of the original Hobie cart up rear (or centre for a PA) and the C-Tug type up front.
I think you would have to make sure the strap and buckle are up really tight to try their shenanigns though!
Good stuff there Steve. I also like the holding frame on the second one, although the rods are much too high up for my liking.
Ah, PVC pipe again.........................
- Yako
- Lord of the fish
- Posts: 1322
- Joined: 10 Mar 2013, 15:37
- kayak: PA 14, A.I, Revo16 & 4.1 Ocean Kayak
- Real Name: Rich
Re: Wheels any ideas
I don't see why you can't use the mirage drive to lock something in like thi cart/trolley except where the front "U" post is you put a swivel beach wheel
John 3.16/17
- laneends
- Vyak Addict
- Posts: 6641
- Joined: 25 Jan 2013, 15:59
- kayak: Quests 11 13 Adventure 16 Revo 16 ORSki epic k1
- Real Name: Keith
- Location: Melbourne, Bundoora
Re: Wheels any ideas
Thats not a bad idea as front and back are on same frame so no stress on hull due to any twisting forces especially as you are not using back scuppers. The weight is taken on the frame not on the mirage mounts. Wouldn't need a beach wheel, a regular wheel would be fine for trundling down the road, you can just lift a little and use as normal trolley on soft sand. Would need a swivel that could stand up to marine environment assuming it would be packed up somehow and taken on board.
I am assuming as a vehicle is no being used whatever is used will need to be packed into/onto kayak as there is nowhere to leave anything behind?
Not sure how the mirage shaft is inserted through slot from below? Demountable from block?
I am assuming as a vehicle is no being used whatever is used will need to be packed into/onto kayak as there is nowhere to leave anything behind?
Not sure how the mirage shaft is inserted through slot from below? Demountable from block?
- Babylon
- Needs a life (forum tragic)
- Posts: 4893
- Joined: 02 Feb 2010, 21:43
- kayak: 2017 Hobie Revo 13, Hobie Compass Duo
- Real Name: Jim
- Location: Corinella Victoria
Re: Wheels any ideas
Half the distance is on crushed rock walking path smooth no bumps and the other half road so surface isn't a problem
should be able to padlock frame to a pole and if wheels are removable put them in Yak.
Instead of mirage drive could make Vee neck to rest front of yak as distance is small shouldn't affect plastic.
Cheers Babylon
should be able to padlock frame to a pole and if wheels are removable put them in Yak.
Instead of mirage drive could make Vee neck to rest front of yak as distance is small shouldn't affect plastic.
Cheers Babylon
- Seasherpa
- PHD in Yakology.
- Posts: 2945
- Joined: 28 Sep 2012, 10:31
- kayak: Lots of composite ones
- Real Name: Eoin (Owen)
- Location: Seaford
- Contact:
Re: Wheels any ideas
If you don't need to pack it up into the yak Jim its probably best to hit up a local metalworker to make you a frame to do exactly what you want. You could even flog your Hobie trolley to offset the cost? A simple caster type arrangement for the front of the dolly in the picture would be pretty straight forward as it is only bushings not bearings. You can also get a full caster set-up for the balloon wheels pre-made, but they aren't cheap.
I can get you any of the wheels/parts from the Beachwheelz catalogue if required:
https://beachwheelsaustralia.com/compar ... ty-wheels/
https://beachwheelsaustralia.com/compar ... on-wheels/
If you know what you need, gimme a shout and I'll try to look after you on price
I can get you any of the wheels/parts from the Beachwheelz catalogue if required:
https://beachwheelsaustralia.com/compar ... ty-wheels/
https://beachwheelsaustralia.com/compar ... on-wheels/
If you know what you need, gimme a shout and I'll try to look after you on price
- Yako
- Lord of the fish
- Posts: 1322
- Joined: 10 Mar 2013, 15:37
- kayak: PA 14, A.I, Revo16 & 4.1 Ocean Kayak
- Real Name: Rich
Re: Wheels any ideas
Hi Jim, 1.2 Km is a fair hike.
If the area is safe, you could try this option & lock everything up
If the area is safe, you could try this option & lock everything up
John 3.16/17
- Babylon
- Needs a life (forum tragic)
- Posts: 4893
- Joined: 02 Feb 2010, 21:43
- kayak: 2017 Hobie Revo 13, Hobie Compass Duo
- Real Name: Jim
- Location: Corinella Victoria
Re: Wheels any ideas
I like it, am going to walk it a couple of times just to see how i go.Yako wrote:Hi Jim, 1.2 Km is a fair hike.
If the area is safe, you could try this option & lock everything up
I know I'm not super fit but wheelchair bound either this is just a thought
and good to get others involved and see what people come up with.Cheers Babylon
Ps Thank you Seasherpa for your offer will keep in mind
- laneends
- Vyak Addict
- Posts: 6641
- Joined: 25 Jan 2013, 15:59
- kayak: Quests 11 13 Adventure 16 Revo 16 ORSki epic k1
- Real Name: Keith
- Location: Melbourne, Bundoora
Re: Wheels any ideas
Some example using beach wheel on custom trailers of various kinds
beach carts
If you are not hauling across sand you can use regular HD wheels
beach carts
If you are not hauling across sand you can use regular HD wheels