Where to buy - threaded stud...
-
- PHD in Yakology.
- Posts: 2846
- Joined: 17 Sep 2017, 18:34
- kayak: dune PA14
- Real Name: Peter
- Location: Clifton springs
Re: Where to buy - threaded stud...
Ok by chance found what your after http://www.dreamkayaks.com.au/railblaza ... mount-kit/
Mob no: 0401580668
Yak PBs kingfish (about this big <>>><), squid 39 cm, king george 42 cm, snapper 72 cm, gummy 122 cm, 71cm flatty (estimated ) Cobia 133cm
Yak PBs kingfish (about this big <>>><), squid 39 cm, king george 42 cm, snapper 72 cm, gummy 122 cm, 71cm flatty (estimated ) Cobia 133cm
- shane
- Vyak Addict
- Posts: 7340
- Joined: 07 Sep 2011, 20:54
- kayak: Hobie AI, PA14, Quest and an ebay tandem
- Real Name: Shane
- Location: Moonee Ponds
Re: Where to buy - threaded stud...
Just get some SS flat of suitable size and some SS bolts of the length required. Drill a hole slightly smaller than the bolt diameter through the flat. Then get a tap and die set (cheap from bunnings) and cut a thread through the hole to match the bolt. Screw the bolt up through and you're done. It should work out quite cheap and requires minimal skills.
0408 565 763
-
- Lord of the fish
- Posts: 1227
- Joined: 24 Apr 2013, 21:23
- kayak: Hobie Outback
- Real Name: Robert
- Location: East Doncaster
Re: Where to buy - threaded stud...
Also available at Capacity Sports Moorabbin $15:00 for two. (No affiliation)peatop wrote:Ok by chance found what your after http://www.dreamkayaks.com.au/railblaza ... mount-kit/
https://paddlesports.capacitysports.com ... cmount-kit
- Reeling
- Lord of the fish
- Posts: 1117
- Joined: 22 Nov 2016, 20:20
- kayak: Stealth PF 525
- Real Name: Nath
- Location: Altona
Re: Where to buy - threaded stud...
Thanks, I ended up bying some 3mm aluminium flat bar. Drill and tapped and cut to size to slide in the groove without hitting the cap heads holding the track in place.Jacko wrote:Also available at Capacity Sports Moorabbin $15:00 for two. (No affiliation)peatop wrote:Ok by chance found what your after http://www.dreamkayaks.com.au/railblaza ... mount-kit/
https://paddlesports.capacitysports.com ... cmount-kit
Tuna 20.5kg ---KingFish 90cm --- Snapper 84cm --- Gummy 83cm (55cm legal) ---- Whiting 40cm --- Silver Trevelly 41cm --- Flathead 52cm --- Aussie Salmon 38cm --- Squid 34cm hood
Facebook Page Reeling Fish
Instagram Page Reeling Fish
Facebook Page Reeling Fish
Instagram Page Reeling Fish