Page 3 of 15

Re: cheater mk 2.4 strip build

Posted: 29 Jul 2018, 18:49
by westy
Most interesting ;) keeping my eye on this build :) .

Re: cheater mk 2.4 strip build

Posted: 29 Jul 2018, 19:07
by spider25160
watching this with real interest

Re: cheater mk 2.4 strip build

Posted: 10 Aug 2018, 21:16
by winchbitch
Looks like another good weekend to build a kayak, hope you're wood arrived.

Re: cheater mk 2.4 strip build

Posted: 10 Aug 2018, 22:48
by Seasherpa
winchbitch wrote:Looks like another good weekend to build a kayak, hope you're wood arrived.
Cheater hasn’t had wood for decades! :lol:

Re: cheater mk 2.4 strip build

Posted: 10 Aug 2018, 23:06
by cheaterparts
winchbitch wrote:Looks like another good weekend to build a kayak, hope you're wood arrived.
yes I have wood - but have to work on a trailer this week end for Mr SeaSlurper
I also have to build a couple of extension tables for the band saw so the Paulownia planks to fit on while sawing the strips

how ever the strong back is finished and mounted on a frame , so basically ready to fit strips to

Re: cheater mk 2.4 strip build

Posted: 12 Aug 2018, 20:00
by happyas
Interesting Stephen. When a young man of yesteryore, I used to help build clinker boats. Originally used Maranti strips, but later boats were built using marine ply.

Re: cheater mk 2.4 strip build

Posted: 14 Aug 2018, 20:28
by peatop
happyas wrote:Interesting Stephen. When a young man of yesteryore, I used to help build clinker boats. Originally used Maranti strips, but later boats were built using marine ply.
Maranti was always chosen for its suitability for boat building and for its finished look in clear coat, most of the craftsmen would use it rather than ply as they were after looks not price ;) . When i was doing a course at Newport tafe a few year's back i would often spend my lunch time looking through the shipwrights building, it was like going for a walk through Mordialoc many years ago, there were some really nice boats to dream about :up: with lots of exotic timber lying around and there scent in the air.

Re: cheater mk 2.4 strip build

Posted: 27 Aug 2018, 22:27
by cheaterparts
Progress has been slow but some tooling was needed - some benches for my band saw to cut strips took a bit of time I also made up a trolley to move the hardback/kayak build around on
I was back on the kayak again this weekend I pulled the strong back out of the shed to get a good sighter on the water line marks and centre lines
a bit of adjustment and the whole lot was made tight and ready to strip

Image

Image

So a few strips are on, the funky shear line wasn't to much trouble the Paulownia bends fairly well and needed to

Image

so from here it's just more of the same fitting and gluing strips for the time being

Re: cheater mk 2.4 strip build

Posted: 28 Aug 2018, 07:30
by Reeling
Looking great Stephen. Keep up the progress!

Re: cheater mk 2.4 strip build

Posted: 29 Aug 2018, 21:58
by peatop
The fun part begins, looking good :up: