Striker 5 install (GEL mount) pics added
- Franko
- Lord of the fish
- Posts: 1233
- Joined: 18 Jan 2015, 01:45
- kayak: Dune AI, stealth Supalite X
- Real Name: Frank
- Location: Sunbury
Striker 5 install (GEL mount) pics added
Saved some vouchers waited for a special and BOOM Frank has upgraded to a Garmin striker 5 GPS/CV. My old 300ç has been amazing and installed into 3 yaks now but I found I desired a unit with GPS. I also decided to wet mount the transducer under the seat first time using this method so will be interesting to see how it performs.
Last edited by Franko on 18 Aug 2017, 16:04, edited 1 time in total.
- bjspinner
- Lord of the fish
- Posts: 1566
- Joined: 13 Jul 2012, 12:08
- kayak: PA14 180Drive/ Oasis
- Real Name: Bruce
- Location: Upper Royal Skye
Re: Striker 5 install
I ran the transducer in the oasis the same way Frank though I cut the bottom out of the plastic container before it was marine gooped in, it worked great just remember to top up the water when needed.
Mobile 0418991898
PB: Micro surgery on one of Scuba Sue's Gummy's
PB: Micro surgery on one of Scuba Sue's Gummy's
- Franko
- Lord of the fish
- Posts: 1233
- Joined: 18 Jan 2015, 01:45
- kayak: Dune AI, stealth Supalite X
- Real Name: Frank
- Location: Sunbury
Re: Striker 5 install
Yeah easy cleaner install, hopefully i don't loose to much water
- R3dY@k
- The force is strong in this one
- Posts: 72
- Joined: 28 May 2015, 09:56
- kayak: Heritage RedFish 12
- Real Name: Ben
- Location: Essendon
Re: Striker 5 install
looks good, interested to know what battery are you pairing with this install?
Cheers,
Ben
Cheers,
Ben
- Seasherpa
- PHD in Yakology.
- Posts: 2945
- Joined: 28 Sep 2012, 10:31
- kayak: Lots of composite ones
- Real Name: Eoin (Owen)
- Location: Seaford
- Contact:
Re: Striker 5 install
You can use ultrasound gel in place of water and not have to worry about it spilling/leaking.FRANKB wrote:Yeah easy cleaner install, hopefully i don't loose to much water
I've got the same one and the reasons I went for it were because of the inbuilt GPS (no card slot to let in water) and that fact it is a 5 inch unit with only a .4a current draw.R3dY@k wrote:looks good, interested to know what battery are you pairing with this install?
Cheers,
Ben
I'm running mine on a 4ah SLA with no issues.
- Franko
- Lord of the fish
- Posts: 1233
- Joined: 18 Jan 2015, 01:45
- kayak: Dune AI, stealth Supalite X
- Real Name: Frank
- Location: Sunbury
Re: Striker 5 install
Eoin my battery is a sealed 12v 7.2 amp
- Franko
- Lord of the fish
- Posts: 1233
- Joined: 18 Jan 2015, 01:45
- kayak: Dune AI, stealth Supalite X
- Real Name: Frank
- Location: Sunbury
Re: Striker 5 install (GEL Mount) updated
UPDATE: After my first wet mount trial failed due to the sellys all clear not going off.I decided to investigate another method and sealing the transducer box with standard silicone and using a "GEL" instead of water. The idea had been suggested by Eoin (seasherpa) in a post stating Ultrasound gel would work. After a lot of google browsing, I read that a home made conductive gel can be made easily. This requires water, salt and a thickening agent. There were two agents suggested gelatine and guam gum I have chosen gelatin as it was easily found at the supermarket, guam gum can be bought from health food shops. It took several attempts to get a consistency I was happy with so that the transducer would sit in the gel without breaking apart. My concern was not having a clear screen but as seen in the pictures below it has worked very well.
My recipe for this gel is as follows:
10 grams of clear gelatin.
2 table spoons of table salt.
500 ml of water.
that easy and now I will never have to top it up with water the pictures were taken in the Maribyrnong river today, I am hoping to figure the temp offset to set the striker closer to actual.
I am very happy with the striker5 and its functions, if I fished more estuaries I would have bought the striker7 with side view. I fish bays more so this unit will do exactly what I require, hours of sounding around hoping to see the arch and then hearing the sweet sound of line being ripped off the spool.
My recipe for this gel is as follows:
10 grams of clear gelatin.
2 table spoons of table salt.
500 ml of water.
that easy and now I will never have to top it up with water the pictures were taken in the Maribyrnong river today, I am hoping to figure the temp offset to set the striker closer to actual.
I am very happy with the striker5 and its functions, if I fished more estuaries I would have bought the striker7 with side view. I fish bays more so this unit will do exactly what I require, hours of sounding around hoping to see the arch and then hearing the sweet sound of line being ripped off the spool.
- Seasherpa
- PHD in Yakology.
- Posts: 2945
- Joined: 28 Sep 2012, 10:31
- kayak: Lots of composite ones
- Real Name: Eoin (Owen)
- Location: Seaford
- Contact:
Re: Striker 5 install (GEL mount) pics added
Great result Frank
I reckon those units are one of the best value combos kicking around at the moment, I just installed another one for a customer on the weekend.
I reckon those units are one of the best value combos kicking around at the moment, I just installed another one for a customer on the weekend.
- Franko
- Lord of the fish
- Posts: 1233
- Joined: 18 Jan 2015, 01:45
- kayak: Dune AI, stealth Supalite X
- Real Name: Frank
- Location: Sunbury
Re: Striker 5 install (GEL mount) pics added
Is that before the hatch Eoin?
- Seasherpa
- PHD in Yakology.
- Posts: 2945
- Joined: 28 Sep 2012, 10:31
- kayak: Lots of composite ones
- Real Name: Eoin (Owen)
- Location: Seaford
- Contact:
Re: Striker 5 install (GEL mount) pics added
Yep just on the rise from the seat to the fish hatch.FRANKB wrote:Is that before the hatch Eoin?