Nice and neat mod Andy!

- can't find any fish?
- can't affort an expensive fish finder?
Solution => make your own reef!
... Priceless!

Nice work! Very impressive!

Thanks for sharring Neil, I've got an xtrail and outback too!
Thinking about getting a similar setup but just wondering does it scrape the bottom much using this method? Or not too bad?

Cheers,
norska

I have an x-trail with 80 kg rated roof racks and use it for my single outback. Personally I wouldn't transport 2 on the roof due to the weight issue and the amount of lift you would get from having two non aerodynamic long kayaks loaded. Sure you'll be under the payload but i'd hate to see the flex...

Another top report digger!

That's the negative of most 100 amp hour batteries. Mine weighs 30 kg! I think different brands vary from 27 to 32 kilograms. Have a look at the everybattery website. They review most brands. I got recommended the remco one because it can be mounted on side, resistant to constant banging (ie wave po...

Thanks for all the comments and feeback guys, just realized I can get deep cycle batteries from work, Jayco :up: Hey ghurkin, I have a Minn Kota riptide 55lb st I-pilot on my 4.2 meter boat. I run it with a remco 100 amp hour agm deep cycle battery and I get at least 15 hours constants use (moving ...

A full days fishing and my sounders suck more than that...I run a lowrance x4 sonar and a x4DSI.(they didn't make an all in one at the time)[/quote] Matt is running a 12 volt 100 ah battery in his boat. I'm guessing you have like a 7.2 to 9 ah battery in the kayak. They are both classed as 12 volt b...

You either never used it or you have your numbers wrong... .3 of a volt :shock: Excuse the ignorance, but is .3v lots or eff all? The sounder read 12.7v when we started, 12.4v when we finished up that night. Remember that this wasn't continuous use, just button pushing for 5-10 seconds to move down...